NEC MultiSync FE700 Serviceanleitung Seite 84

5-3. Brightness Max Adjustment
Signal : No. 31 (VESA 1024*768@85Hz(Window)) All black
(1) Receive Signal 31.
(2) Turn the CA-100 into xyY mode.
(3) Open Menu (F), TAG 1-1 " BRIGHTNESS MAX. " and adjust Y so that its color analyzer
indicated value is 6.0 ± 0.5 cd/㎡ by "+", "－" SW.
5-4. Color Temperature Adjustment
Signal : No. 31 (VESA 1024*768@85Hz(Window)) White window pattern
(1) Receive Signal 31(White window pattern).
(2) Open Menu (F), TAG 1 " BRIGHTNESS " and set to 110.
(3) Setting 00 channel of x, y and Y mode at the color analyzer and make sure that the following
value is set.
x = 0.283
(4) Turn the CA-100 into analyzer mode.
(5) Open Menu (F), TAG 1 " CONTRAST " and adjust the smallest value of color analyzer indicated
value is 100±5 by "+", "－" SW.
(6) Open Menu (F), TAG 3 "(other colors) GAIN" and adjust so that its color analyzer indicated value is
100±5 by "+", "－" SW. At this time, do not change the adjustment value (in 5-4(5) of the GAIN. If
its color analyzer indicated value is not 100±5, adjust it by Menu (F), TAG 3 "GAIN" again.
(7) Repeat similar adjustment for other preset color as follows.
COL.SELECT
9000K
8500K
8000K
7500K
Note: Change COL.SELECT to 9300K, 9000K, 8500K, 8000K and 7500K, image color
should be change to reddish.
One of three colors should be keep maximum "GAIN" in the all color temperatures.
(8) Close menu.
5-5. Brightness Adjustment
Signal : No. 31 (VESA 1024*768@85Hz(Window)) White window pattern
Color : 9300K
(1) Receive Signal 31 (White window pattern).
(2) Turn the CA-100 into xyY mode.
(3) Open Menu (F), TAG 1 " BRIGHTNESS "and set to 110.
(4) Adjust "CONTRAST MAX" if Y value is more than 140 cd/m²
Open Menu (F), TAG 1-2 " CONTRAST MAX. " and adjust so that its color analyzer indicated
value is 140±5cd/m² by "+", "－" SW. If Y value of color analyzer is less than 140 cd/m²,don't
need to adjust CONTRAST MAX.
(5) A version : Open Menu (F), TAG 7 "CONT PRESET" and set to "MAX" by "+" SW.
B version: Open Menu (F), TAG 7 "CONT PRESET" so that its color analyzer indicated value is
110±5cd/m2 by "+", "-" SW.
(6) Close menu.
y = 0.297 Y = 20 cd/㎡
x y Y
0.285 0.297 20cd/m2
0.291 0.306 20cd/m2
0.295 0.310 20cd/m2
0.300 0.315 20cd/m2
5-19