NEC MultiSync FE700 Serviceanleitung Seite 103

f. Display "MONITOR INFORMATION" of the OSM, and confirm that the model name and
serial number have been correctly written.
g. Press the F1 key to start the inspection of DDC1.
After the completion of inspection, the contents of EDID are displayed. If an error should
occur, the related error message will be displayed in the bottom area of the screen.
Refer to Paragraph 3.19.5 in regard to the meaning of this error message.
h. Press the F2 key to start the inspection of DDC2B.
After the completion of inspection, the contents of EDID are displayed. If an error
should occur, the related error message will be displayed in the bottom area of the
screen. Refer to Paragraph 3.19.5 in regard to the meaning of this error message.
6- 2