NEC MultiSync FE700 Serviceanleitung Seite 68

2-5. Setting
Unless otherwise specified ,Controls should be as following
1) Brightness :
2) Contrast :
2-6. Adjustment equipment
The adjustment should be conducted using the following equipment.
Alternate equipment may be used if they are measured the correlation data with following equipment.
Video Signal generator :
Brightness/Color meter :
HV (high voltage) meter :
D.C. volt meter :
A.C. volt meter :
Oscilloscope :
Screen volt meter :
Ruler :
External degaussing coil
Note) Adjustment timings are timing tables, not programmed timings.
3. OSM Menu Operation
3-1. Front Panel
Preset
MAX
Leader Electronics LVG-1603 /
Astrodesign VG-819
Minolta Color Analyzer CA-100
Sensitive Research Electrostatic Voltmeter Model ESH
Input resistance more than 1MΩ
Input resistance more than 1MΩ
Higher than 20MHz bandwidth
Maximum voltage more than 1500V
Input resistance more than 1000MΩ
Flexible type
Stick type
Multisync
5-3