HBM t40 Montageanleitung Seite 6

6
Symbol:
Meaning: Statutory waste disposal mark
In accordance with national and local environmental protection and material
recovery and recycling regulations, old devices that can no longer be used
must be disposed of separately and not with normal household garbage.
If you need more information about waste disposal, please contact your local
authorities or the dealer from whom you purchased the product.
Conversions and modifications
The transducer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
Qualified personnel
The transducer must only be installed and used by qualified personnel, strictly
in accordance with the specifications and with safety requirements and
regulations. It is also essential to comply with the legal and safety
requirements for the application concerned during use. The same applies to
the use of accessories.
Qualified personnel means persons entrusted with siting, mounting, starting
up and operating the product who possess the appropriate qualifications for
their function.
Accident prevention
According to the prevailing accident prevention regulations, once the torque
transducers have been mounted, a covering agent or cladding has to be fitted
as follows:
• The cover or cladding must not be free to rotate.
• The cover or cladding should avoid squeezing or shearing and provide
protection against parts that might come loose.
• Covers and cladding must be positioned at a suitable distance or be so
arranged that there is no access to any moving parts within.
• Covering agents and cladding must also be attached if the moving parts of
the torque transducer are installed outside peoples' movement and
operating range.
HBM
T40
A2463 5.0 en/de