Hardware Diagnostics - Lenovo ThinkStation P710 Hardwarebedienungsanleitung

2. Repeatedly press and release the F10 key when turning on the computer. The main screen of the
UEFI diagnostic program is displayed.
3. Follow the instructions on the screen to use the diagnostic program.
The options on the main screen are as follows:
Table 1. Items on the main screen of the UEFI diagnostic program
DIAGNOSTICS
• LCD test
• Memory - Quick test
• Memory - Extended test
• Motherboard test
• PCI-e test
• Storage - Quick test

Hardware diagnostics

Your computer supports the hardware diagnostics function. This function enables your computer to
monitor some hardware components in real time for potential issues that might not be easily detectable
during normal use. When the computer detects an issue or error, the diagnostic indicator on the front of
the computer is illuminated or blinks. See "Front view" on page 27.
For information about the issue or error, do the following:
1. Connect either of the following devices to the diagnostic USB connector on the front of the computer:
• A USB key
TM
• An Android device with the Lenovo Workstation Diagnostics app installed
See "Front view" on page 27.
2. Wait about 10 to 15 seconds for the diagnostic data to transfer from the computer to the USB device.
During the data transfer, the diagnostic indicator blinks quickly. When the data transfer finishes, the
indicator stops blinking and stays on.
Note: Diagnostic data is available for transfer through the diagnostic USB connector only when the
diagnostic indicator is illuminated or blinks at an error detection. In normal conditions, the diagnostic
USB connector functions as a standard USB 3.0 connector.
3. Depending on whether you are using a USB key or an Android device (such as a smartphone), do
one of the following:
• If you are using a USB key, go to http://support.lenovo.com/workstation_diagnostics for information
about how to read the error data on the USB key.
• If you are using an Android device with the Lenovo Workstation Diagnostics app installed, open the
application for details about the error. For more information on the Lenovo Workstation Diagnostics
app, go to
http://www.thinkworkstationsoftware.com/diags.
For more information about how to use the diagnostic USB connector on your computer, decipher the error
codes, or use the Lenovo Workstation Diagnostics app, go to:
http://www.thinkworkstationsoftware.com/diags
The hardware diagnostic function is enabled on your computer by default. To disable the function, do
the following:
86
ThinkStation P510 and P710 Hardware Maintenance Manual
TOOLS
• System information
• Recover bad sectors tool
• Generate configuration file
• Execute from configuration file
• Exit application