Inhaltsverzeichnis
Werbung
6. Align the two tabs
chassis.
Figure 113. Positioning the rear fan assembly
7. Pivot the new rear fan assembly toward the rear panel as shown until the retaining clip snaps into
position.
Figure 114. Installing the rear fan assembly
8. Connect the rear fan assembly cable to the rear fan connector on the system board. See "Parts on the
system board" on page 35.
160
ThinkStation P510 and P710 Hardware Maintenance Manual
1
on the new rear fan assembly with the two corresponding slots in the computer
Werbung
Inhaltsverzeichnis
