Lenovo ThinkStation P710 Hardwarebedienungsanleitung Seite 148

10. Slide the storage drive bracket with the converter into the storage drive bay.
Figure 86. Installing the type
11. Connect the signal cable and the power cable to the converter, and then close the handles on both
sides of the storage drive bracket.
To install or replace a 2.5-inch storage drive with a converter in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 99.
2. Locate the storage drive bay in which you want to install or replace a storage drive. See "Internal
drives" on page 38.
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 87. Removing the type
142
ThinkStation P510 and P710 Hardware Maintenance Manual
1
storage drive bracket
2
storage drive bracket
2 bracket, do the following: