Lenovo ThinkStation P710 Hardwarebedienungsanleitung Seite 117

3. Lift the clip on the rear of the flex module. Then, slide the flex module cover to the rear of the flex
module to remove the cover.
Figure 27. Removing the flex module cover
4. If you are installing a new slim optical drive, press the two metal clips
the two screws as shown. Remove the two screws and then go to step 4.
Figure 28. Removing the plastic clip with the two screws
If you are replacing an old slim optical drive, do the following:
a. Press the button as shown to remove the slim optical drive from the flex module.
Figure 29. Removing the slim optical drive from the flex module
1 to remove the plastic clip with
.
Chapter 9 Installing or replacing hardware
111