Inhaltsverzeichnis
Werbung
8. Push the metal bracket down until the tab
drive forward as shown until the tab
Figure 84. Installing the metal bracket into the plastic frame of the converter
9. Flex the sides of the storage drive bracket and align the four pins
corresponding holes in the converter.
Note: Ensure that the circuit board faces upward and the connectors
bracket.
Figure 85. Installing the converter into the type
1
is slightly curved. Then, push the bracket with the storage
1
snaps into position.
1
bracket
1
on the bracket with the
2
face toward the front of the
.
Chapter 9
Installing or replacing hardware
141
Werbung
Inhaltsverzeichnis
