Inhaltsverzeichnis
Werbung
Then, flex the sides of the bracket to remove the storage drive from the bracket.
Figure 61. Removing the storage drive from the type
4. Flex the sides of the bracket and align pins
storage drive. Do not touch the circuit board
Note: Ensure that the circuit board
the bracket.
Figure 62. Installing the storage drive into the type
1
bracket
1
on the bracket with the corresponding holes in the new
2
on the storage drive.
2
faces upward and the connectors
1
bracket
3
face toward the front of
.
Chapter 9
Installing or replacing hardware
129
Werbung
Inhaltsverzeichnis
