Inhaltsverzeichnis
Werbung
To install or replace a 2.5-inch storage drive in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 99.
2. Locate the storage drive bay. See "Internal drives" on page 38.
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 73. Removing the type
4. If you are replacing a storage drive, flex the sides of the bracket to remove the storage drive from
the bracket.
Figure 74. Removing the storage drive from the type
2
2
storage drive bracket
2
bracket
bracket, do the following:
.
Chapter 9
Installing or replacing hardware
135
Werbung
Inhaltsverzeichnis
