Lenovo ThinkStation P710 Hardwarebedienungsanleitung Seite 185

16. Use a screwdriver to slightly lever the clips that secure the front panel I/O cable. Remove the front
panel I/O cable from the metal bracket.
Figure 140. Removing the front panel I/O cable from the metal bracket
To install a new front panel I/O cable, do the following:
1. Install the front panel I/O cable into the cable bracket. Press down the clips until the front panel I/O
cable is secured in place.
Figure 141. Installing the front panel I/O cable into the cable bracket
179
.
Chapter 9 Installing or replacing hardware