Inhaltsverzeichnis
Werbung
6. Click Next. The Virtual Drive Definition window is displayed. Change the virtual hard disk drive options
from the default settings listed on the screen to the settings you want. Click Accept , and then follow
the instructions on the screen to customize your settings.
7. Click Next, and the Preview window is displayed.
8. Verify your settings, and then click Accept.
9. Click Yes to save the configuration.
Deleting RAID volumes using the LSI MegaRAID BIOS configuration utility
This section provides instructions on how to delete RAID volumes using the LSI MegaRAID BIOS
configuration utility.
To delete RAID volumes using the LSI MegaRAID BIOS configuration utility, do the following:
1. Enter the LSI MegaRAID BIOS configuration utility. See "Entering the LSI MegaRAID BIOS configuration
utility" on page 75.
2. Click the virtual hard disk drives you want to delete, and then the Virtual Drive window is displayed.
3. Click Delete, and then click Go.
4. Click Yes to save your changes.
Setting the hot spare hard disk drive
This section provides instructions on how to set the hot spare hard disk drive.
To set the hot space hard disk drive, do the following:
1. Enter the LSI MegaRAID BIOS configuration utility. See "Entering the LSI MegaRAID BIOS configuration
utility" on page 75.
2. Click the hard disk drive you want to set as the hot spare hard disk drive. The Drive window is displayed.
3. Select Make Global HSP or Make Dedicated HSP, and then click Go.
4. The main screen of the LSI MegaRAID BIOS configuration utility is displayed, and the hard disk drive
you selected is listed as a hot spare hard disk drive in the right pane.
76
ThinkStation P510 and P710 Hardware Maintenance Manual
Werbung
Inhaltsverzeichnis
