Inhaltsverzeichnis
Werbung
7. Gently press down the small handle
until it is in the fully open position.
Figure 127. Opening the microprocessor retainer
8. Lift the microprocessor straight up and out of the microprocessor socket. Place the old microprocessor
on a static-protective surface.
Notes:
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
Figure 128. Removing the microprocessor
9. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the computer. Then, remove the new microprocessor from the package.
170
ThinkStation P510 and P710 Hardware Maintenance Manual
2
to open the microprocessor retainer. Pivot the retainer upward
Werbung
Inhaltsverzeichnis
