Inhaltsverzeichnis
Werbung
• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 119. Opening the retaining clips
7. Position the new memory module over the memory slot. Ensure that the notch
module aligns correctly with the slot key
down into the slot until the retaining clips close.
Figure 120. Installing a memory module
8. Reinstall the optical-drive bracket if you have removed it. See "Optical-drive bracket" on page 122.
9. Reinstall the direct cooling air baffle. See "Direct cooling air baffle" on page 101.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 189.
Flex adapter
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Depending on your computer model, the type of flex adapter on your computer varies.
2
on the system board. Push the memory module straight
Chapter 9
1
on the memory
.
Installing or replacing hardware
165
Werbung
Inhaltsverzeichnis
