Inhaltsverzeichnis
Werbung
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 189.
Installing or replacing a 2.5-inch storage drive with a converter in the storage drive bay
Depending on your computer model, one of the following types of storage drive bracket is used in the
storage drive bay:
Figure 77. Two types of storage drive bracket
Note: This section illustrates only installing or replacing a 2.5-inch solid-state drive with a converter.
To install or replace a 2.5-inch storage drive with a converter in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 99.
2. Locate the storage drive bay in which you want to install or replace a storage drive. See "Internal
drives" on page 38.
3. Depending on whether you are installing or replacing a 2.5-inch storage drive with a converter, do
one of the following:
• If you are installing a 2.5-inch storage drive with a converter, open the handles on both sides of the
storage drive bracket. Then, pull out the empty bracket.
1
bracket, do the following:
.
Chapter 9
Installing or replacing hardware
137
Werbung
Inhaltsverzeichnis
