Supersonic AIXPLORER MultiWave Bedienungsanleitung Seite 29

LED State
SOLID RED PLD loaded and configured
SOLID ORANGE
boot loader successfully
SLOW BLINKING
RED(<1Hz)
FAST BLINKING
RED (>2Hz)
SLOW BLINKING POSERVER successfully
ORANGE (<1Hz) communicated with MDSP
FAST BLINKING
ORANGE (>2Hz)
SLOW BLINKING System is fully functional.
GREEN (<1Hz)
SOLID GREEN System is fully functional.
Aixplorer® Fusion/Navigation User's Guide
Description of
board status
POSERVER DSP -
loaded and running.
All preliminary
tests completed.
POSERVER DSP -
application loaded,
running and Command
Handler executing
MDSP DSP -
code downloaded
by POSERVER
All of POSERVER
initialization and power
on test is complete
The transmitter is not
being energized during
acquisition. (ASLEEP)
The transmitter is being
energized during the
acquisition. (AWAKE)
Possible Error
Conditions resulting
in LED state:
Board error
Board un-powered
Flash memory
un-programmed
POSERVER DSP error
Board error
Multi-Boot
Loader test failed
POSERVER main
application not found
Code corrupt
DSP error
Board error
MDSP application
not found in Flash
Communications failure
Failed starting MDSP
MDSP failed to
respond to messages
MDSP code corrupt
MDSP error
Board error
SYSTEM EEProm error
PLD version error
MDSP fails to
respond after tests
MDSP test failed
Transmitter not present
Transmitter
EEProm error
Transmitter
hardware failure
System ASLEEP
- normal
ff auto-config issued
then abnormal
System AWAKE normal
If SLEEP command
issued then abnormal.
23