Cleaning And Disinfecting The Drivebay - Supersonic AIXPLORER MultiWave Bedienungsanleitung

High-level disinfect or sterilize with Cidex Activated Dialdehyde
solution such as made by Johnson & Johnson©, or high-level disinfect
with Cidex OPA, or ANSI/AAMI current standards, or any equivalent
validated sterilization or high-level disinfection method adopted by the
sterilization department for like devices.
Please refer to accompanying document of each Disinfectant or
Sterilizing Agent to confirm appropriate usage and effect-efficacy.
Cleaning and Disinfecting the
driveBAY
Periodically, clean the equipment (electronics unit, transmitter, sensor
and cables) by wiping down with a cloth dampened in a cleaning solution
such as mild soap and water, isopropyl alcohol or a similar acceptable
cleaning solution. If the tracker's components come in contact with
biological fluid or tissue, be sure to follow your organization's procedures
for proper cleaning and disinfection.
The electronic units, transmitter and sensor are not designed to withstand
autoclaving and gamma radiation. Sensors are ETO compatible. Do not
submerge the electronic unit, transmitter, sensor or cables in liquids.
Components are not waterproof.
106 Aixplorer® Fusion/Navigation User's Guide