Network Monitoring - D-Link DES-3326 Bedienungsanleitung

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
To make a static DNS table entry:
Click the Static Setup link on the DNS Relay menu:
The following fields can be set:

Network Monitoring

The DES-3326 provides extensive network monitoring capabilities that can be viewed from the under
Network Monitoring menu.
Network monitoring on the switch is divided into Layer 2 and Layer 3 functions, depending upon which
operating mode the switch is in. Layer 2 network monitoring functions are visible on the console when
the switch is in Layer 2 Only operating mode. Layer 3 network monitoring functions are added to the
console when the switch is in IP Routing operating mode.
Layer 2 Network Monitoring
Layer 2 network monitoring consists of the following screens or menus:
Statistics
•
Port Utilization
•
Port Error
Figure 7-69. DNS Relay Setup window
Parameter
Domain Name
IP Address
<0.0.0.0>
Status <Enabled>
Description
The domain name of the static DNS
table entry.
The IP address of the domain name
above.
This field can be toggled using the
space bar between Enabled and
Disabled.
247