D-Link DES-3326 Bedienungsanleitung Seite 222

The following fields can be set or are displayed:
Route Redistribution Settings
Route redistribution allows routers on the network − that are running different routing protocols − to
exchange routing information. This is accomplished by comparing the routes stored in the various
router's routing tables and assigning appropriate metrics. This information is then exchanged among
the various routers according to the individual routers current routing protocol. The DES-3326 can
redistribute routing information between the OSPF and RIP routing protocols to all routers on the
network that are running OSPF or RIP. Routing information entered into the Static Routing Table on
the local DES-3326 switch is also redistributed.
Figure 7-36. OSPF Area Aggregation Configuration window
Parameter
Area ID
Network Number
Advertisement
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
Allows the entry the OSPF Area ID
for which the routing information will
be aggregated. This Area ID must be
previously defined on the switch.
Sometimes called
Address. The 32-bit number in the
form of an IP address that uniquely
identifies the
corresponds to the OSPF Area above.
This field can be toggled between Yes
and No using the space bar. It
determines whether
selected OSPF Area will advertise it's
summary LSDB (Network-Number
and Network-Mask) or not.
222
the Network
network that
or not the