DES-3326 Layer 3 Fast Ethernet Switch User's Guide
•
Hardware-based Layer 3 IP switching.
•
IP packet forwarding rate of 6.6 Mpps.
•
2K active IP address entry table per device.
•
Supports RIP – (Routing Information Protocol) version I and II.
•
Supports OSPF − (Open Shortest Path First)
•
Supports MD5 and Password OSPF Packet Authentication
•
Supports IP version 4.
•
IGMP version 1 and 2 support (RFC 1112 and RFC 2236).
•
Supports PIM Dense Mode.
•
Supports DVMRP.
•
Supports IP multi-netting.
•
Supports IP packet de-fragmentation.
•
Supports Path MTU discovery.
•
Supports 802.1D frame support.
Traffic Classification and Prioritization
•
Based on 802.1p priority bits
•
4 priority queues
Management
•
RS-232 console port for out-of-band network management via a console terminal or PC.
•
Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of
network loops.
•
SNMP v.1 Agent.
•
Fully configurable either in-band or out-of-band control via SNMP based software.
•
Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the
console.
•
Built-in SNMP management:
Bridge MIB (RFC 1493)
MIB-II (RFC 1213)
Mini-RMON MIB (RFC 1757) – 4 groups
CIDR MIB (RFC 2096), except IP Forwarding Table.
13