D-Link DES-3326 Bedienungsanleitung Seite 206

<Disabled>
Upper Threshold for
Base ports <128>
Upper Threshold for
Module ports <128>
GVRP <Disabled>
GMRP <Disabled>
Switch Settings − Layer 3 IP Routing Protocol Settings
The Layer 3 Switch Settings menu only allows the available multicasting
protocols to be enabled or disabled − globally − on the switch.
The multicasting and routing protocols are setup under the Multicasting and the Configure Layer 3 −
IP Networking menus.
To access the Layer 3 IP Routing Protocol Settings window, go to the Configuration menu, select
Switch Settings, and then click Layer 3 IP Routing Protocol Settings:
The following fields can then be set:
dictate, globally, the switch's reaction to Broadcast storms
and/or Multicast storms, triggered at the threshold set
below.
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of the
Master Ports – that will trigger the switch's reaction to a
Broadcast/Multicast storm.
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of the
module ports – that will trigger the switch's reaction to a
Broadcast/Multicast storm.
Allows the Group VLAN Registration Protocol (GVRP) to be
globally Enabled or Disabled on the switch.
Allows the Group Multicast Registration Protocol (GMRP)
to be globally Enabled or Disabled on the switch.
Figure 7-17. Layer 3 IP Routing Protocol Settings window
Parameter
DVMRP <Disabled>
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
Allows the Distance-Vector Multicast
Routing Protocol (DVMRP) to be
Enabled or Disabled globally on the
206