D-Link DES-3326 Bedienungsanleitung Seite 246

DNS Relay
To enter the IP addresses of DNS servers (for the DNS Relay service):
Select DNS Relay on the Configuration menu and then click DNS Relay:
The following fields can be set:
BOOTP/DHCP
Server <0.0.0.0>
Figure 7-68. DNS Relay Setups window
Parameter
DNS Relay State
<Disabled>
Primary Name
Server <0.0.0.0>
Secondary Name
Server <0.0.0.0>
DNSR Relay Cache
Server Status
<Disabled>
DNS Relay Static
Table Lookup
Status <Disabled>
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
servers reside on.
Allows the entry of IP addresses for
up to four BOOTP or DHCP servers.
Description
This field can be toggled between
Disabled and Enabled using the pull-
down menu, and is used to enable or
disable the DNS Relay service on the
switch.
Allows the entry of the IP address of
a primary domain
(DNS).
Allows the entry of the IP address of
a secondary domain name server
(DNS).
This can be toggled between Disabled
and Enabled. This determines if a
DNS cache will be enabled on the
switch.
This field can be toggled using the
pull-down menu between Disabled
and Enabled. This determines if the
static DNS table will be used or not.
246
name server