D-Link DES-3326 Bedienungsanleitung Seite 150

IP Forwarding
Static/Default Routes
With the switch in Layer 3 Operation mode, entries into the switch's forwarding table can be made
using both MAC addresses and IP addresses. Static IP forwarding is accomplished by the entry of an IP
address into the Static IP Routing table.
Static Address Resolution Protocol (ARP) entries can also be made from the Forwarding Menu.
Highlight Static/Default Routes from the Forwarding Menu and press Enter.
The following fields can be set:
Figure 6-70. Setup Static IP Routes screen
Parameter
Action:<Add >
IP Address:[ ]
Subnet Mask:[ ]
Gateway IP:[ ]
Metric:[1 ]
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
above resides.
Description
The field can be toggled between Add
and Delete using the space bar.
Allows the entry of an IP address
that will be a static entry into the
switch's Routing table.
Allows the entry of a subnet mask
corresponding to the IP address
above.
Allows the entry of an IP address of a
gateway for the IP address above.
Allows the entry of a routing protocol
metric representing the number of
routers between the switch and the
IP address above.
150