Filtering - D-Link DES-3326 Bedienungsanleitung

DES-3326 Layer 3 Fast Ethernet Switch User's Guide

Filtering

Layer 2 Filtering
To enter a MAC address into the filtering table, highlight Filtering from the Main Menu and press
Enter.
Figure 6-64. Filtering Menu
Highlight MAC Address Filter and press Enter.
Figure 6-65. Setup MAC Address Filter screen
When the switch is in Layer 2 Only operating mode, MAC addresses can be entered into the static
filtering table. The switch can be configured to filter packets from this MAC address (a source), or to it
(a destination). The switch can also be configured to filter all packets to or from this MAC address
(either a source or a destination).
146