D-Link DES-3326 Bedienungsanleitung Seite 158

Create Spanning Tree Groups
The DES-3326 switch allows you to configure Spanning Tree Groups that consist of a group of ports
that will be handled as though they were a single spanning tree device. The following figures and tables
describe how to configure a spanning tree group.
To configure spanning tree groups on the switch, highlight STP Group Configuration from the Main
Menu and press Enter.
The following fields can be set:
Spanning Tree Port Settings
The following figure and table describe the display of the current STP port settings on the switch.
Figure 6-77. STP Group Configuration screen
Parameter
Action:
<Add/Modify>
Group Name:
[ ]
Membership
(M/-):[ ][ ][ ]
Description
The field can be
Add/Modify and Delete using the space
bar.
A 12-character name used to identify a
given STP group.
Allows the selected
designated as a member of the current
STP Group. Move the blinking cursor
below the dash representing the port to
be made a member and toggle between
− and M. − signifies that the selected
port is not a member of the STP Group,
and M signifies that the port is a
member of the STP Group.
158
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
toggled between
port to be