D-Link DES-3326 Bedienungsanleitung Seite 165

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
To make a static DNS table entry:
Select Static table configuration on the DNS Relay menu and press Enter.
Figure 6-87. DNS Relay screen
Parameter
DNSR Status
<Disabled>
Name Server:[1][2]
DNSR Cache
Status:<Disabled>
DNSR Static Table
Lookup
Status:<Disabled>
Description
This field can be toggled between
Disabled and Enabled using the
space bar, and is used to enable or
disable the DNS Relay service on the
switch.
Allows the entry of the IP address of
a primary (number
secondary (number 2) domain name
server (DNS).
This can be toggled between Disabled
and Enabled. This determines if a
DNS cache will be enabled on the
switch.
This field can be toggled using the
space bar between Disabled and
Enabled. This determines if the static
DNS table will be used or not.
165
1) and a