D-Link DES-3326 Bedienungsanleitung Seite 213

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
An example is presented below:
In this case, 6 IP interfaces are required, so a CIDR notation of 10.32.0.0/11 (or a 11-bit) addressing
scheme will work.
11111111.11100000.00000000.00000000 (binary) or 255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example would give 6 network addresses and 6
interfaces.
Any IP address from the allowed range of IP addresses for each interface can be chosen as an IP
address for an IP interface on the switch.
For this example, we have chosen the next IP address above the network address for the IP interface's
IP Address:
The 6 IP interfaces, each with an IP address (listed in the table above), and a subnet mask of
255.224.0.0 can be entered into the Setup IP Interface window.
To setup IP Interfaces on the switch:
Go to the Configuration menu, select Configure Layer 3 – IP Networking, and then click Setup IP
Interfaces:
VLAN Name
System (default)
Engineer
Marketing
Finance
Sales
Backbone
Table 6-3. VLAN Example – Assigned Ports
This addressing
VLAN Name VID
System (default) 1
Engineer 2
Marketing 3
Finance 4
Sales 5
Backbone 6
Table 6-4. VLAN Example – Assigned IP Interfaces
VID Switch Ports
1 5, 6, 7, 8, 21, 22, 23, 24
2 9, 10, 11, 12
3 13, 14, 15, 16
4 17, 18, 19, 20
5 1, 2, 3, 4
6 25, 26
scheme will
Network Number
10.32.0.0
10.64.0.0
10.96.0.0
10.128.0.0
10.160.0.0
10.192.0.0
213
give a subnet
IP Address
10.32.0.1
10.64.0.1
10.96.0.1
10.128.0.1
10.160.0.1
10.192.0.1
mask of