D-Link DES-3326 Bedienungsanleitung Seite 218

The following parameters can be set or are displayed:
OSPF Area Setting
This menu allows the configuration of OSPF Area IDs and to designate these areas as either Normal or
Stub. Normal OSPF areas allow Link-State Database (LSDB) advertisements of routes to networks that
are external to the area. Stub areas do not allow the LSDB advertisement of external routes. Stub
areas use a default summary external route (0.0.0.0 or Area 0) to reach external destination.
Parameter
OSPF Route ID
Current Route ID
AS Border Router
State
Figure 7-33. OSPF Area Setting window
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
A 32-bit number (in the form of an IP
−
address xxx.xxx.xxx.xxx)
uniquely identifies the switch in the
OSPF domain. It is common to
assign the highest
assigned to the switch (router). In
this case, it
10.255.255.255, but any unique 32-
bit number will do. If 0.0.0.0 is
entered, the highest
assigned to the switch will become
the OSPF Route ID.
Displays the OSPF
currently in use by the switch. This
Route ID is displayed
convenience to the
changing the switch's OSPF Route
ID.
Autonomous System Border Router −
displays whether or not the switch is
configured as an AS Border Router.
Allows OSPF to
disabled globally
without changing
configuration.
218
that
IP address
would be
IP address
Route ID
as a
user when
be enabled or
on the switch
the OSPF