D-Link DES-3326 Bedienungsanleitung Seite 125

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
Figure 6-43. Setup RIP screen
Parameter
Interface
name:[System ]
TX Mode<Disabled>
RX
Mode<Disabled>
Authentication:
Password:
Description
The name of the IP interface on
which RIP is to be setup. This
interface must
configured on the switch.
Toggle among Disabled, V1 Only, V1
Compatible, and V2 Only. This entry
specifies which version of the RIP
protocol will be used to transmit RIP
packets. Disabled
transmission of RIP packets.
Toggle among Disabled, V1 Only, V2
Only, and V1 and V2. This entry
specifies which version of the RIP
protocol will be used to interpret
received RIP packets.
prevents the reception
packets.
Toggle between
Disabled. When authentication is
enabled, a password is used to
authenticate
between routers on the network.
Authentication is
when RIP is in V1 Compatible or V2
only mode.
A password to
authenticate
between routers on the network.
125
be previously
prevents the
Disabled
of RIP
Enabled and
communication
only supported
be used to
communication