D-Link DES-3326 Bedienungsanleitung Seite 75

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
The format of the Hello packet is shown below:
Field
Network Mask
Options
Hello Interval
Router Priority
Router Dead Interval
Designated Router
Backup Designated Router
Neighbor
Hello Packet
Version No.
1
Router ID
Area ID
Checksum
Authentication
Authentication
Network Mask
Hello Interval
Router Dead Interval
Designated Router
Backup Designated Router
Figure 5-26. Hello Packet
The network mask associated with this interface.
The optional capabilities supported by the router.
The number of seconds between this router's Hello
packets.
This router's Router Priority. The Router Priority is
used in the election of the DR and BDR. If this field
is set to 0, the router is ineligible to become the DR
or the BDR.
The number of seconds that must pass before
declaring a silent router as down.
The identity of the DR for this network, in the view of
the advertising router. The DR is identified here by
its IP interface address on the network.
The identity of the Backup Designated Router (BDR)
for this network. The BDR is identified here by its IP
interface address on the network. This field is set to
0.0.0.0 if there is no BDR.
The Router Ids of each router from whom valid Hello
packets have been seen within the Router Dead
Interval on the network.
Packet Length
Authentication Type
Options Router Priority
Neighbor
Description
75