Spanning Tree - D-Link DES-3326 Bedienungsanleitung

The following fields can be set:

Spanning Tree

STP Switch Settings
To globally configure STP on the switch, select Spanning Tree Protocol on the Configuration menu
and then click STP Switch Settings.
The Spanning Tree Protocol (STP) operates on two levels: on the switch level, the settings are globally
implemented. On the port level, the settings are implemented on a per user-defined Group basis.
The factory default setting should cover the majority of installations. It is
advisable to keep the default settings as set at the factory unless it is absolutely
necessary to change them.
Parameter
Interface Name
IP Address
MAC Address
Figure 7-56. STP Switch Settings window
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
The name of the IP interface the ARP
entry resides on.
The IP address of the ARP entry.
The MAC address of the ARP entry.
238