4
Transport and intermediate storage
4.1
Transport
Check the delivery conditions.
– Check the packaging for transport damage.
– Determine damages and contact the manufacturer and
the insurance company.
NOTICE
Damage to the mechanical seal due to improper transportation.
Protect the pump shaft against displacement during transport
with transport insurance.
4.1.1
Transporting the pump without the motor
The pump shaft (210) must be fixed.
Dissemble the coupling protection (681) from the drive
lantern.
Loosen screws (901.3).
Push the lock washers (931) into the shaft groove.
Tighten screws (901.3).
4.2
Lifting the pump
DANGER
Goods being transported can fall and result in death or crushing of
limbs!
The lifting hooks on the motor are designed for the weight of the
motor. The lifting hooks can break if the complete pump unit is
attached.
Attach the hoisting equipment to both the motor and pump
sides if hooks are provided.
Use only hoisting and load-bearing equipment which is
suitable, technically sound and can bear enough weight.
Only transport the pump/unit in the correct position.
Do not stand under suspended loads.
The motor is the heaviest part of the pump.
04/2019
Transport and intermediate storage
EN 17