Sirona Dental Systems GmbH
Instructions for Conversion to CEREC AC CEREC AC Connect
63 43 631 D3492
D3492.092.05.01.02 03.2011
5.2
Installing the upper side cover
NOTICE
The middle screw (B2) is an M4x10 machine screw; the other two
screws (B1) are self-tapping screws.
1. Hold the upper side cover with attached antenna against the stop at
the front and twist in the rear half until the upper side cover is flush.
2. Attach the upper side cover using three screws (B). Use the washer
for the middle screw (B2).
Installing the covers
Installing the upper side cover
13