Fastening The Antenna To The Upper Side Cover - Sirona Cerec AC Connect Umbauanleitung

Installing the wireless module

Fastening the antenna to the upper side cover

10
3.1
Fastening the antenna to the upper side cover
➢ Screw the antenna tight onto the upper side cover using the studs
and screws supplied.
or
If no fastening holes are present, attach the antenna using the
➢
supplied fastening part instead of the studs. Peel off the protecti-
ve foil from both sides of the fastening part and affix one side se-
curely to the upper side cover. Affix the other adhesive surface
securely to the antenna.
Instructions for Conversion to CEREC AC CEREC AC Connect
Sirona Dental Systems GmbH
63 43 631 D3492
D3492.092.05.01.02 03.2011