Removing The Front Panel - Sirona Cerec AC Connect Umbauanleitung

Removing the covers

Removing the front panel

empty
6
2.2
Removing the front panel
Removing covers
Removal
✔
The back panel is fully removed, see Removing and inserting the
back panel.
1. Flip the footswitch down.
2. Loosen the screws of the cover (B) and the camera cable fastener
(C).
3. Remove the three screws (A) on each side.
4. Pull the front panel forwards and remove the cover.
Instructions for Conversion to CEREC AC CEREC AC Connect
Sirona Dental Systems GmbH
63 43 631 D3492
D3492.092.05.01.02 03.2011