Operation; Preparing The Exposure - Sirona Orthophos 3 Gebrauchsanweisung

6 Operation

6
Operation
6.1

Preparing the Exposure

3
18
X
Y
F
Z
A
Loading the Film Cassette
Treat the film cassette and intensifier screen with care to
avoid scratching the screen or denting the cassette
housing.
Opening the cassette
Push the locks X forward as shown and lift up lever Y.
Place film in the cassette.
Closing the cassette
Press the cover down uniformly on both sides until the
locks click.
Insert Contact Spacer F
Application: For all exposure programs.
Always place the contact spacer where, as a result of
anatomical features, with correct head positioning there
is no contact with the forehead (no 3-point fixing).
After positioning the head, press the contact spacer onto
the tube and push it down to the forehead contact.
Insert Head Positioner C
Application: Exposure program P6.
Open temple supports with knob (3). Remove rubber
inserts Z and insert head positioner up to stop.
C
Insert Bite Block A
or contact segment B.
Application: Exposure programs P1 and P11.
B
Sirona Dental Systems GmbH
Operating Instructions ORTHOPHOS 3
60 82 262 D 3285
D 3285.201.04.06.02