Final Work; Notes On Pairing Wireless Modules; Checking The Function; Information For The Customer - Sirona Cerec AC Connect Umbauanleitung

Sirona Dental Systems GmbH
Instructions for Conversion to CEREC AC CEREC AC Connect
63 43 631 D3492
D3492.092.05.01.02 03.2011
6

Final work

6.1

Notes on pairing wireless modules

The two 8614/F2 wireless modules for the CEREC AC acquisition unit
and the CEREC MC XL milling unit are identical parts ex works, i.e. the
hardware and software of these parts do not differ in any respect prior to
the pairing process.
The procedure for pairing the 8614/F2 wireless modules (CEREC AC/MC
XL) and the 8614/F2 wireless module (CEREC AC) with the 8612/F2
wireless module (CEREC 3 milling unit) is described in the supplied in-
stallation instructions (62 80 064). The procedure for connecting the wire-
less modules to the CEREC MC XL and CEREC 3 milling units is also
described in these installation instructions.
6.2

Checking the function

1. Connect the acquisition unit to the power supply.
2. Switch the acquisition unit on at the main switch.
3. Start the software and check its full range of functions.
6.3

Information for the customer

1. Hand over the supplement to the operating instructions to the custo-
mer.
2. Inform the customer that the complete Operating Instructions for the
CEREC AC Acquisition Unit and the CEREC 3D Operator's Manual
can be found on the Document CD (REF 62 99 171).
Final work
Notes on pairing wireless modules
17