Installing The Inlab 3D Software - Sirona INEOS Inbetriebnahme

Sirona Dental Systems GmbH
Startup and Installation Instructions for the inLab PC system inEos
Installation procedure
Selecting the standard installation
60 35 302 D 3446
D 3446.031.01.05.02 06.2009
1 Requirements for initial startup of the inEos with the inLab PC system
1.3

Installing the inLab 3D software

NOTICE
Administrator rights
Installation only with administrator rights
You must have administrator rights on the PC on which you want to install
the software!
Installing the software
✔ The PC is powered up and all programs are terminated.
1. Insert the DVD in the CD/DVD drive.
The setup program starts automatically.
2. If this is not the case, run the
DVD.
3. Select the language of the installation and click the button marked
The installation wizard opens.
"Next"
4. Click the button.
The license agreement is shown.
5. Accept the license agreement with the
The program continues the installation routine.
Standard installation
1. Click the button marked
NOTICE
Installing DirectX
If DirectX is not yet installed on your computer, it will be installed now.
Accept the license agreement and decide whether the computer is to be
restarted now or later.
2. To complete the installation, you can register to receive current
information on software updates and/or have the
This file contains the latest information on the software.
Select or deselect the corresponding checkbox.
3. Click the button marked
4. Decide whether the computer should be restarted now or later and click
"Finish"
the button marked
Installing the inLab 3D software
"Setup.exe"
file in the root directory of the
"Yes"
button.
"Standard Installation"
.
"ReadMe"
"Finish"
.
.
"OK"
.
file displayed.
7