Installing The Rear Panel - Sirona Cerec AC Connect Umbauanleitung

Installing the covers

Installing the rear panel

empty
16
5.5
Installing the rear panel
B
A
A
Installing the covers
Installation
NOTICE
Different screw lengths.
Please note that the longer screws B1 and B2 are intended for use on
the lower part of the back panel. See the illustration for the precise order.
1. Fasten the back panel to the acquisition unit with the six screws (B).
Pay attention to the order of the screws.
2. Insert the three screw caps (C) onto the back panel shown.
3. Insert the battery (if present).
4. Close the doors (A) on the back panel.
Instructions for Conversion to CEREC AC CEREC AC Connect
C
A B1 C
B2
Sirona Dental Systems GmbH
63 43 631 D3492
D3492.092.05.01.02 03.2011