Installing The C Cable - Sirona Cerec AC Connect Umbauanleitung

Sirona Dental Systems GmbH
Instructions for Conversion to CEREC AC CEREC AC Connect
63 43 631 D3492
D3492.092.05.01.02 03.2011
4

Installing the C cable

1. Remove the six screws of the control unit.
2. Raise the control unit slightly and carefully rotate it clockwise.
3. From the left side of the unit, pull off the socket housing (A) attached
to the bottom of the control unit (2-pole with brown and white wires).
4. Plug the socket housing that you pulled off of the control unit into the
appropriate connector of the supplied C cable.
5. Plug the 2-pole socket housing of the supplied C cable into the con-
nector on the control unit.
6. Bring the control unit back into position and screw it tight with six
screws.
Installing the C cable
11