Filter Cartridge Replacement Procedure - Agilent Technologies MS40+ Bedienungshandbuch

5.
6.
7.

Filter Cartridge Replacement Procedure

1.
2.
Figure 7
3.
4.
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01
Oil and Filter Cartridge Replacement Procedures
Open the fill oil cap using a 10 mm hex key and add 1 liter of
SW60 oil.
Close the oil fill cap tight.
Replace the cartridge filter as per following slide.
Unscrew the cap rotating it anti-clock wise, by hand or socket
wrench with size 19 mm.
Pull out the cartridge filter.
Cap
Insert new cartridge filter and double check it is in the right
position (inserted in the appropriate hole).
Tighten the cap rotating clock wise, by hand or socket wrench
with size 19 mm.
Technical Information
Cartridge Filter
P/N 9499201
(E)
5
67/90