Werbung
5
Technical Information
Warning Notes
j
Do not wear any objects that may become entangled in the mechanisms and/or act as
conductors (chains, bracelets, etc.).
k
Ensure that the tools to be used are in perfect working condition and have insulating
grips, where necessary. Check that the insulating material of the cables and that the
conductors of the test equipment do not show any signs of damage.
l
Do not replace the oil immediately after stopping the machine as the oil may still be at
high temperature.
m
Perform repairs in clean and, where possible, dustfree areas. Protect all the clearances of
connection points with suitable plastic caps and cover the machined surface areas of all
parts stripped down until they are put back on the pump again.
62/90
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01
(E)
Quicklinks ausblenden:
Werbung
Kapitel
