Werbung
Starting and Running the Pump
WARNING!
The pump is designed for operation with neutral or non-corrosive fluids. It is
absolutely forbidden to use potentially explosive or flammable substances.
If the pump is started with cold oil, initially more than normal noise will be
NOTE
heard; this will last for a few minutes only until the oil reaches its working
temperature.
There are no special instructions for normal opera-tion of the pump,
which is delivered to you after completion of a runningin cycle in the
factory.
To allow the pump starting you have to wire properly the interlock pins by
NOTE
connecting the mating connector provided with the pump.
For repetitive work cycles, with brief time intervals in between, it is better not to
NOTE
stop the pump.
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01
Technical Information
Starting and Running the Pump
(E)
5
59/90
Quicklinks ausblenden:
Werbung
Kapitel
