Warranty; Warranty Replacement And Adjustment - Agilent Technologies SH-110 Bedienungshandbuch

Warranty

Products manufactured by Seller are warranted against
defects in materials and workmanship for twelve (12)
months from date of shipment thereof to Customer, and
Seller's liability under valid warranty claims is limited, at
the option of Seller, to repair, to replace, or refund of an
equitable portion of the purchase price of the Product.
Items expendable in normal use are not covered by this
warranty. All warranty replacement or repair of parts shall
be limited to equipment malfunctions which, in the sole
opinion of Seller, are due or traceable to defects in origi-
nal materials or workmanship. All obligations of Seller
under this warranty shall cease in the event of abuse,
accident, alteration, misuse, or neglect of the equipment.
In-warranty repaired or replaced parts are warranted only
for the remaining unexpired portion of the original war-
ranty period applicable to the repaired or replaced parts.
After expiration of the applicable warranty period, Cus-
tomer shall be charged at the then current prices for parts,
labor, and transportation.
Reasonable care must be used to avoid hazards. Seller
expressly disclaims responsibility for loss or damage
caused by use of its Products other than in accordance
with proper operating procedures.
Except as stated herein, Seller makes no warranty,
expressed or implied (either in fact or by operation of
law), statutory or otherwise; and, except as stated herein,
Seller shall have no liability under any warranty,
expressed or implied (either in fact or by operation of
law), statutory or otherwise. Statements made by any per-
son, including representatives of Seller, which are incon-
sistent or in conflict with the terms of this warranty shall
not be binding upon Seller unless reduced to writing and
approved by an officer of Seller.
iv
SH-110 Dry Scroll Vacuum Pump
Warranty Replacement
and Adjustment
All claims under warranty must be made promptly after
occurrence of circumstances giving rise thereto, and must
be received within the applicable warranty period by
Seller or its authorized representative. Such claims should
include the Product serial number, the date of shipment,
and a full description of the circumstances giving rise to
the claim. Before any Products are returned for repair
and/or adjustment, written authorization from Seller or its
authorized representative for the return and instructions
as to how and where these Products should be returned
must be obtained. Any Product returned to Seller for
examination shall be prepaid via the means of transporta-
tion indicated as acceptable by Seller. Seller reserves the
right to reject any warranty claim not promptly reported
and any warranty claim on any item that has been altered
or has been returned by non-acceptable means of trans-
portation. When any Product is returned for examination
and inspection, or for any other reason, Customer shall be
responsible for all damage resulting from improper pack-
ing or handling, and for loss in transit, notwithstanding
any defect or non-conformity in the Product. In all cases,
Seller has the sole responsibility for determining the cause
and nature of failure, and Seller's determination with
regard thereto shall be final.
If it is found that Seller's Product has been returned with-
out cause and is still serviceable, Customer will be noti-
fied and the Product returned at the Customer's expense;
in addition, a charge for testing and examination may be
made on Products so returned.
3/1/00