Werbung
5
Technical Information
Connections to the Inlet and Exhaust Flanges
If rigid piping is used, it is good practice to use a flexible joint in order to avoid
NOTE
undue forcing of the connection on the pump.
The exhaust duct must be connected to a pipe that will take away the
pumped out gases.
An internal oil mist eliminator avoids pollution of the surrounding atmosphere by
NOTE
the oil present in the exhaust duct during pump operation.
CAUTION!
Never block the pump exhaust line. This would cause overpressure in the casing
with the risk of breaking the oil tank.
58/90
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01
(E)
Quicklinks ausblenden:
Werbung
Kapitel
