Werbung
Storage
When transporting and storing the pumps, the following
environmental requirements should not be exceeded:
Preparation for Installation
The pump is supplied in a special protective packing. If this shows
signs of damage which may have occurred during transport, contact
your local sales office.
Total weight of the pack, including the pump, is approx. 35 Kg.
When unpacking the pump, be sure not to drop it and avoid any kind
of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with EEC Directive
85/399.
Normal exposure to the environment cannot dam-age the pump. Nevertheless, it
NOTE
is advisable to keep it closed until it is installed in the system, thus pre-venting
any form of pollution by dust.
The pump is provided with some standard accessories:
NOTE
1 9 pin "D" connector for I/O (female) (excluding model 949-9241)
1 9 pin "D" connector for RS232 (male) (excluding model 949-9241)
IEC320 retention spring
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (E)
temperature: from -20° to +70 °C
relative humidity: 0 – 95 % (non-condensing)
Instructions for Use
Storage
41/90
4
Quicklinks ausblenden:
Werbung
Kapitel
