Technical Information; Controller Description; Technical Specification - Agilent Technologies TV 301-P Bedienungshandbuch

CONTROLLER DESCRIPTION

The dedicated controller is a solid-state frequency con-
verter which is driven by a single chip microcomputer
and is composed of two PCBs which include power
supply and 3-phase output, analog and input/output
section, microprocessor and digital section.
The power supply, together with the 3-phase output,
converts the single phase AC mains supply into a 3-
phase, low voltage, medium frequency output which is
required to power the pump.
The controller can be operated by a remote host com-
puter via the serial connection. A Windows-based soft-
ware is available (optional).
The controller can also be operated as a Profibus DP
slave device.

TECHNICAL SPECIFICATION

Rotational speed 56000 RPM
Start-up time < 3 minutes
Operating ambient + 5° C to + 35° C
temperature
Noise level ≤ 45 dB (A) at 1 meter
Pwr supply (mains):
Input voltage: 100 - 240 Vac
Max input pwr: 300 VA
Stand-by pwr: 10 W
Max oper. power: 150 W with water or air cooling
Protection fuse 8 A
Pwr supply (24 Vdc):
Input voltage: 24 Vdc
Max input pwr: 200 W
Stand-by pwr: 10 W
Max oper. power: 150 W with water or air cooling
Protection fuse 8 A
Compliance with:
Power cable
Storage temperature
Output
Lubricant
Installation category
Pollution degree
Weight kg (lbs):
Controller:
When the TV 301-P Navigator Controller has been
stored at a temperature less than 5°C, wait until the
system has reached the above mentioned temperature.
35

TECHNICAL INFORMATION

UNI EN 292-1
UNI EN 292-2
EN-CENELEC 55011
IEC 1000-4-2 (ex 801-2)
IEC 1000-4-3 (ex 801-3)
IEC 1000-4-4 (ex 801-4)
EN 61010-1 (IEC 1010-1)
EN 1012-2
With European or NEMA plug
3 meters long (optional)
-20° C to +70° C
75 Vac, three phase, 963 Hz
permanent lubrication
II
2
Kit: ISO 100 and 160: 4.5 (10)
CFF 6" and 8": 8 (17.6)
1 (2.2)
NOTE
87-901-001-01 (A)