Using The Programmes - Gram KPS-Series Bedienungsanweisung

Using the programmes

It is possible to select user programmes that have been saved by the user, or select a number of
preset programmes.
User programmes:
Select Menu 03, and push
program
IFR
program
user
Select
The display shows the programme number and the type of process saved:
Program 01
neg core -25°C
Use the up/down keys
MENU
or push to exit the programme without starting the process.
Pressing the programme is selected, and the controller enters the standby mode.
Preset programmes
Program
preset
Select
Select the required programme with
It is possible to select the following preset programmes:
Prog Name
21 meat
22 dairy
23 pie
24 stew
25 fish
26 poultry
27 vegetables
28 freezing temp
29 freezing time
765041088
to enter the menu:
program
preset
and push
to select a programme. Push
and press
. Push
Positive/ Time/
negative temperature
positive temperature
positive time
positive time
positive time
positive time
positive time
positive time
negative temperature
negative time
to enter the user programmes (01-20).
START
STOP
to start the selected programme,
to enter the preset programmes (21-29).
START
STOP
to start the programme, or push
Room setpoint
Hard
storing
yes +2°C
no +2°C
no +2°C
no +2°C
yes +2°C
yes +2°C
no +2°C
yes -22°C
yes -22°C
program
user
MENU
exit.
Time
120 min.
90 min.
90 min.
90 min.
90 min.
90 min.
90 min.
240 min.
240 min.
26