Gram KPS-Series Bedienungsanweisung Seite 29

Use the up/down keys
To change a parameter, push
Push again to confirm the new value. Push
Description of parameters:
Parameter Description
P01 Room temperature setpoint, soft
P02 Room temperature setpoint, hard
P03 Probe temperature setpoint, soft
P04 Probe temperature setpoint, hard
P05 Duration of the process
P06 Hard phase duration expressed in % relative to P05
P07 Room temperature setpoint, storage
N01 Room temperature setpoint
N02 Probe temperature setpoint
N03 Duration of the process
N04 Room temperature setpoint, storage
A01 Temperature alarm hysteresis
A02 High temperature alarm, relative to P07
A03 Low temperature alarm, relative to P07
A04 High temperature alarm, relative to N04
A05 Low temperature alarm, relative to N04
A06 Temp.alarm delay from storage or defrost start
A07 Temp.alarm delay
For setting other parameters, refer to the operating- and servicemanual.
If necessary, it can be ordered from your dealer.
Reset of memory:
Select Set Up 05. Push
Push to confirm the reset.
Push to exit the menu without resetting the memory.
Restore default parameters:
Push Set Up 06. Push
Push to restore the default parameters.
Push to exit the menu.
765041088
to scroll the various parameters.
, and then use the up/down keys
Blast chilling, positive
Blast chilling, negative
Alarms
to reset the memory:
to enter the menu, the display shows:
MENU
to return to the menu.
Default
240 min
Reset memory?
No
No
to change the value.
Min.
-5°C -30°C
-25°C -40°C
3°C -30°C
20°C -30°C
90 min 0 min
60% 0%
2°C -30°C
-25°C -40°C
-18°C -30°C
0 min
-22°C -40°C
2°C 0°C
10°C 0°C
-10°C -50°C
10°C 0°C
-10°C -50°C
60 min 0 min
30 min 0 min
OK
Default
OK
Max.
30°C
30°C
30°C
30°C
900 min
100%
30°C
30°C
30°C
900 min
30°C
10°C
50°C
0°C
50°C
0°C
300 min
300 min
29